GLASS DEFENDER® SERIES
GLASS DEFENDER® SERIES
Previous
Next
The Glass Defender® Series consists of a variety of invisible coatings for glass that protect the surface from a wide variety of damaging elements. In addition, Glass Defender coatings help to resist scratching on glass surfaces.
Intended Use
The Glass Defender® Series is designed for all glass surfaces including plate or tempered glass. This product is not suitable for use in areas where food may come in contact with the protected glass.
Recommendations
In order to maintain the glass after using the Glass Defender® Series, clean only with deionized water 2-3 times annually. Oily residues in typical surfactant based soaps and detergents attract, and glue, a variety of environmental contaminates to building surfaces, causing stains.
Product Information
Product Details
Equipment Needed
Application
Precautions
Tech Details
Warranties
Data Sheet
Product Details
These products help to prevent the development of stains caused by minerals including silicates, magnesium, calcium, lime, rust and salts. These protective coatings will also keep water from penetrating the glass surface, and thus eliminate damage caused by ion exchange, oxidation, water erosion, etching and stage 1 and 2 corrosion. They also help protect against environmental damage, including high mineral content tap or well water, exhaust fumes, chemicals, acid rain, ice, everyday grime and buildup, and mineral dust in the air. When water comes into contact with treated surfaces, it beads and runs down the glass, partially cleaning the surface. This helps to keep windows cleaner longer, and aides in deionized water window cleaning. The materials in the Glass Defender® Series are extremely durable, and can withstand high levels of UV rays and temperatures between -50°F and 500°F.
To protect glass for 10-20 years, use Glass Defender® HD.
To protect glass for 5-10 years, use Glass Defender® MD.
ADVANTAGES
- Specifically designed for architectural glass surfaces
- Protects glass from stage 1 and 2 corrosion, stains and water erosion
- Helps reduce scratches
- Provides the longest lasting glass protection available
- Excellent beading capabilities
- Invisible protection
- Low Cost; only 5-19¢ per sq. ft.
- Allows windows to be cleaned using only deionized water
- Inorganic polymers resist aging
- Won’t fade, crack or peel
- Helps to prevent costly restoration
Equipment Needed
- Gloves and goggles
- Microfiber towels
- Application sponge
- Window cleaning bucket
- Clean, dry window cleaning brush or squeegee
Application
SURFACE PREPARATION
Protection performance warranties are contingent upon using either Presto’s EnviRestore® Glass Stain Remover or Glass ReSurfacer® Final Polish to prepare the glass surface immediately prior to the application of the Glass Defender® Series. Remove all dirt from the surface. The level of protection will be sacrificed if all contaminants are not removed prior to use. Be sure to polish the glass surface with a rag to remove all restoration product residues. Do not use detergents on the glass between the restoration and the application of the Glass Defender® Series. Apply the product immediately after the glass restoration process has been completed.
Precautions
Tech Details
Warranties
The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.
Data Sheet