Description
EnviRestore Glass Stain Remover is a restorative cream that removes stubborn stains from glass surfaces, and is most commonly used to remove stains that have not damaged the surface of the glass such as: waterproofing overspray, oils, soap scum, light stains, and caulking residue.
In situations where stains have damaged the surface of the glass, we recommend Glass ReSurfacer Final Polish.
PRODUCT DESCRIPTION
This product effectively removes what is commonly referred to as stage 1 corrosion as well as stains caused by mineral deposits, including calcium, lime, magnesium, rust, salts, efflorescence and high mineral content tap or well water. This solution also removes damage caused by soap scum, oils, acid rain, adhesives, water repellant overspray and/or leaching, caulking or coating residue, exhaust fumes, everyday grime and buildup, and other stubborn stains from architectural glass surfaces without the use of machinery. This product is an effective preparatory measure when using Presto’s Glass Defender, invisible glass protection.
ADVANTAGES
- Environmentally safe
- Non-toxic
- Acid-free
- Removes stubborn stains
- Easily removes oily silane and siloxane waterproofing overspray
- Removes years of buildup
- No greasy residue
- Water-based
- Cost-effective
- Easy to use and cleanup
- Effectively restores glass
- Great prep for Glass Defender Series products
- Long shelf life (3 years)
INTENDED USE
This product removes stains caused by foreign materials from the glass surface, but will not repair damage caused to the glass surface as a result of corrosion. Product may cause minor scratching which can only seen when glass is viewed in direct sunlight. To avoid this, use Presto’s Glass ReSurfacer® System in order to remove all types of glass stains and repair damage. The Glass ReSurfacer system produces optical distortion-free results.
| EnviRestore GSR Product Info Chart | |
| Solvent | Water Based |
| Flammable | No |
| User Friendly | Yes |
| Economically Efficient | Yes |
| Environmentally Friendly | Yes |
| Color | White |
| Smell | Pine |
COVERAGE RATES
250-500 sq. ft. per qt. depending on level of staining
NECESSARY EQUIPMENT
- Gloves and goggles
- Presto’s microfiber towels
SURFACE PREPARATION
Clean surface prior to use. Remove dirt or sand which may scratch the glass. It is extremely important that the application pad or towel used with this product is not contaminated with abrasives. Always test in a small, inconspicuous area in direct sunlight prior to use.
APPLICATION
Apply this product to previously cleaned surface with a sponge, white, non-abrasive pad or a soft towel. Apply a small amount of product to the applicator. Agitate the product on the surface until the stain is removed, wiping away any excess residue. Do not use excessive pressure or minor scratching can occur. To remove oily stains, apply product and allow the product residue to dry to a white powder. Remove the white material by using a dry towel or white, non-abrasive pad. Do not inhale any dry dust from this product. In some instances, a second or third application may be required. If Presto’s Glass Defender will be applied after the restoration process, DO NOT use or oily detergents containing surfactants to clean the surface.
Reviews
There are no reviews yet.