Glass restoration
Glass ReSurfacer Pad
The six inch polishing pad the Glass ReSurfacer system runs on. Chosen after testing dozens of materials woven into hundreds of pads, for the fastest polishing rate Presto has measured.
- Size
- 6 inch
- Fits
- Backer Pad / any 5/8in chuck
- Life
- 10 to 20 hours / continual use
- Clean it
- Every 15 minutes in use
Order
You will also need
This pad does not mount to a machine on its own, and it does not restore glass on its own. It is one of three things that have to be on site together.
- Backer Pad 6in$23.90
- Glass ReSurfacer Final Polish$65.45
- Variable speed polisher or random orbital sanderNot supplied
Before you start
This is a pad, not a chemical. It carries no safety data sheet and no hazard rating. What it does carry is the single biggest cause of scratched glass on a restoration job: a contaminated pad.
What to know
- Clean the pad before you use it, and every 15 minutes while you are using it. Dust or dirt caught in the pad is what scratches glass, and 15 minutes is how quickly it picks enough up to matter.
- Clean it with a stainless steel or copper wire brush. Run the polisher upside down on slow and work from the centre outward, then rinse the pad before carrying on.
- Performance is at its best just after the pad has been cleaned, so the cleaning is not only about avoiding damage.
- The pads ship in a durable resealable bag. Keep them in it between jobs, because that is what stops them picking up contamination in storage.
- A pad lasts roughly 10 to 20 hours of continual use. How it is cared for and stored decides which end of that range you get.
Circular scratch marks
If circular scratch patterns appear on the glass, the pad or the product has picked up contamination. Clean the pad and polish the marks out with the same system.
The three parts of the system
Glass restoration with this system needs all three of these on site. Any one of them missing and the job cannot start.
The pad · you are here
Glass ReSurfacer Pad 6in
The working surface. Removes stains, surface damage and light scratches from tempered and plate glass without burning it, and leaves a highly reflective finish.
The mount
Backer Pad 6in
Holds this pad on the machine. Hook and loop face, hard rubber core, foam cushion, and it fits any polisher with a standard 5/8in threaded chuck.
View productThe compound
Glass ReSurfacer Final Polish
The polish this pad is designed to run with. Together they clear light to medium staining without scratching or burning the glass.
View productTwo ways to drive it. The pad fits the Backer Pad for use on any 5/8in threaded variable speed polisher, and it is also made to adhere directly to a random orbital sander. The sander is slower and less likely to scratch; the polisher is faster and clears heavier staining.
Technical details
| Diameter | 6 inches |
|---|---|
| Mounts to | Glass ReSurfacer Backer Pad, for any machine with a standard 5/8in threaded chuck |
| Also fits | Adheres directly to a random orbital sander |
| Service life | Approximately 10 to 20 hours of continual use, depending on care and storage |
| Cleaning interval | Before use, then every 15 minutes while in use |
| Used with | Glass ReSurfacer Final Polish |
| Suitable surfaces | All kinds of glass, including tempered and plate |
| Removes | Stains, surface damage and light scratches, without scratching or burning the glass |
| Packaging | Durable resealable plastic bag, to prevent contamination before use |
| Safety data sheet | None. This is a pad and carries no hazard classification. |
Warranty terms in full
The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful consideration should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the compatibility of the product with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or in writing.
Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.










