The Backer Pad attaches to any standard polisher with a 5/8″ chuck and is 6″ wide. One Backer Pad works for both glass and metal restoration. Just pair it with the right polishing pad for your job.

Intended Use

• Restoring glass? Use the Backer Pad with the Glass ReSurfacer Pad to remove stains from glass.
• Restoring metal? Use the Backer Pad with the EnviRestore MSR Foam Pad 6″ on metal surfaces such as anodized aluminum.

Recommendations

• For glass: For best results, use the Backer Pad with the Glass ReSurfacer Pad and Glass ReSurfacer Final Polish.
• For metal: For best results, use the Backer Pad with the EnviRestore MSR Foam Pad 6″ and Metal ReSurfacer.

How it works

The Backer Pad has a hook and loop surface that holds your polishing pad securely in place. Its hard rubber core and foam cushion give the polishing pad firm, even support while you work.

Use a variable speed polisher

The Backer Pad and both polishing pads are made to be used with a variable speed polisher. Being able to change the speed lets you adjust for different surfaces and conditions.

The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.

The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.

Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.