METAL PROTECTOR® HD
METAL PROTECTOR® HD
Leaves a high gloss finish on the surface enhancing the appearance of the metal, in addition to installing a protective barrier.
Intended Use
For use on a variety of metal surfaces including, but not limited to, anodized aluminum, which is commonly found on window mullions, aluminum composite panels and painted or coated architectural surfaces.
Recommendations
Product Information
ADVANTAGES
- Long lasting metal protection
- Fights stains and corrosion
- Cost-effective
- Helps to prevent frequent costly restoration
- Extremely damaged window mullions can be made to look new using Metal Protector HD
- Allows metal to be cleaned using only deionized water
- Gloves and goggles
- Absorbent microfiber or disposable towels
- Application sponge roller or brush
- Optional: HPLV Sprayer and chemical respirator mask
Apply product with a sponge roller, paint brush or sprayer. This product is similar to the application of paint. This product can be diluted with water for spray applications.
For a highly polished and enhanced surface, apply product evenly to the surface using a fine mist sprayer such as a HPLV (High-Pressure, Low-Volume) sprayer. A fine sponge or paint brush can also be used but may leave brush strokes on the surface.
The coating will begin to cure within 15 minutes and will not fully cure for 48 hours. No liquids may come into contact with the surface during that time.
MAINTENANCE
In most circumstances, protected metal surfaces can be cleaned using only deionized water.
For best adhesion and protection, first restore surface with Metal ReSurfacer® . Preparation of the surface is crucial to proper adhesion, and can be achieved with fine grit sandpaper or a solvent wipe.
COVERAGE RATES
50 to 100 sq. ft. per quart.
| Metal Protector HD Product Info Chart | |
| Solvent | Water Based |
| Flammable | No |
| User Friendly | No |
| Economically Efficient | Yes |
| Environmentally Friendly | Yes |
| Color | Milky white dries crystal clear |
| Smell | Unique |
