Stone Restore CB2 5G

$119.00

Stone Restore CB2 (5G Pail)

Stone Restore CB2 (Chlorine Bleach) functions as a double-strength chlorine bleach and contains Presto’s proprietary blend of surfactants and degreasers to help loosen dirt and oils so that they may be cleaned away revealing a stain-free surface.

Category: SKU: SRCB2-5G

Description

This product functions as double-strength chlorine bleach, which is not available at common retail outlets. This product also contains Presto’s proprietary blend of surfactants and degreasers to help loosen dirt and oils so that they may be cleaned away revealing a stain-free surface.

ADVANTAGES

  • Fights stains caused by mold, mildew, and red clay
  • Safe for brick and block
  • Quick bleaching action
  • Deep penetrating action
  • Safe on glass and anodized aluminum

HORIZONTAL OR VERTICAL

Product is suitable for use on horizontal or vertical surfaces.

COVERAGE RATE

2,000 to 20,000 feet per 5 gallon pail depending on dilution rate.

INTENDED USE

This product is designed for use on most types of stone. Special precautions are required when using this product to clean limestone, marble or travertine.

RECOMMENDATIONS

We recommend the use of Presto’s stone protective treatment to protect the newly restored surface for years:

  • Leach Stop – Mineral Leaching Mitigation Treatment
Stone Restore CB2 Product Info Chart
Solvent Water Based
Flammable No
User Friendly No
Economically Efficient Yes
Environmentally Friendly No
Color Yellowish Green
Smell Similar to Bleach

DILUTION

Stone Restore CB2 should be used at a dilution rate of at least 3 to 1. For brick surfaces, dilute 1 to 9 with water. For concrete with stubborn stains, start by using a 10 to 1 mix, then dilute as needed.

SURFACE PREPARATION

Protect unintended surfaces from contact, including traffic and pedestrian areas below the project, electric tools, fabrics, furniture, fixtures, and plants. Always test in a small, inconspicuous area before use. If the product comes in contact with plant life, wash off leaves and soak the root system well.

APPLICATION

Wet the intended surface before application. Have running water available to keep the surface damp. Apply an even coat of cleaner using a low-pressure (40 psi max.), chemical-resistant sprayer. Keep the area moistened with Stone Restore CB2 to loosen the soil. Immediately rinse unintended surfaces, such as glass or frames.

For deep stains, allow the cleaner to penetrate the substrate for 10-20 minutes, but never allow the surface to dry.
After the product has saturated the stone, rinse using a pressure washer and a white, 40-degree tip or a green, 25-degree tip. Keep the tip as far away from the surface as possible. If a pressure washer is not available, use a brush to help loosen stubborn soils. For best results, use heated, deionized water.

Always rinse the area thoroughly to ensure no product is left behind. Multiple applications may be required for heavily soiled, porous or absorbent surfaces, and should be applied immediately after the initial application. Follow the same instructions for each application.

Situations including various stone types or different natured stains may require multiple products. Presto’s stone cleaning line includes:

  • Stone Restore® HD For difficult to remove mineral stains caused by efflorescence, rusting, red clay, iron and more
  • Stone Restore® CT A multi-purpose stone cleaner that removes a variety of stains from all types of stone materials
  • Stone Restore® PS For stubborn surface contamination on all types of polished stone

PRECAUTIONS

Stone Restore CB2 may cause discoloration on some stone surfaces or affect the adhesion of water repellants if used incorrectly. Never let this product dry on the surface. Do not mix this product with any other chemicals.

WARRANTIES

The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. If this product is found to be defective, we will provide a sufficient amount to replace the defective product.

VIEW STONE RESTORATION PICTURES

View our Stone Restoration Pictures Featuring projects that utilized our many products for building restorations, maintenance or cleaning projects.
After cleaning or sealing stone surfaces the glass windows and metal frames almost always need to be cleaned, and many times window spots and stains are removed as well. View our glass and metal products that complement our stone restoration and protection arsenal.

DON’T FORGET THE GLASS AND METAL

  • Glass ReSurfacer Final Polish
  • Glass Defender
  • EnviRestore Metal Stain Remover

Additional information

Weight 230 lbs

Reviews

There are no reviews yet.

Be the first to review “Stone Restore CB2 5G”

Your email address will not be published. Required fields are marked *

Post comment