Glass ReSurfacer Stripper Case

$999.99

6 Cases (72 Quarts)

Category: SKU: GRS-12/1QT/CS

Description

Glass ReSurfacer Stripper is an acid-based solution used to remove heavy mineral staining prior to using the Glass ReSurfacer Final Polish. This is a liquid stripper that should be applied with a cloth applicator. This product removes extremely difficult mineral stains such as silica, effectively reducing the amount of time necessary to achieve desired results when using Glass ReSurfacer Final Polish.

INTENDED USE

For use on both tempered and plate glass surfaces.

RECOMMENDATIONS

Following restoration, we recommend the application of Presto’s Glass Defender® Series to seal the glass, and preserve the newly restored finish for up to 20 years.

RELATED PRODUCTS

  • Multi-Surface Synthetic Pads
  • ReSurfacer Backer Pads
  • Motorized Polisher
  • Glass ReSurfacer® Polisher by Flex
  • Glass ReSurfacer® Backer Pad – 6″
  • Glass ReSurfacer® 6″ Pad
  • Glass ReSurfacer Final Polish
  • Microfiber Towel 
  • White Non-Abrasive Synthetic Pad 

PRODUCT DETAILS

ADVANTAGES

  • The only complete solution specifically designed for exterior high-rise glass restoration projects
  • Restores a severely stained window (6’ x 4’) in less than one hour
  • Extremely detailed application instructions
  • Works fast to decrease labor costs
  • Economical
  • Easily transportable; no cumbersome equipment
  • Repairs damage caused by failed glass restoration attempts
  • Removes scratches and virtually any imperfection from glass
  • Leaves no optical distortion
  • No harsh abrasives or chemicals in Glass ReSurfacer Final Polish
  • Produces a highly reflective finish on glass
  • Eliminates need for glass replacement
Glass ReSurfacer Stripper Product Info Chart
Solvent Water Based
Flammable No
User Friendly No
Economically Efficient Yes
Environmentally Friendly No
Color Clear
Smell None

COVERAGE RATES

600 – 1,000 sq. ft. per qt.

NECESSARY EQUIPMENT

  • Acid-resistant gloves
  • Chemical goggles, face mask
  • Access to clean water
  • Window cleaning bucket, squeegee and brush
  • Presto’s microfiber towels

SURFACE PREPARATION

Inspect areas for tinting or performance coatings that may be damaged or removed during the resurfacing process. Clean all glass, frames, gaskets or caulking joints to remove any dirt or sand that will scratch the glass.

Always test all products and combinations of products in a small, inconspicuous area in direct sunlight prior to use. The application of this product is optional. While it has performance benefits, the risk associated with using a strongly acidic product must be carefully considered.

This procedure should only be attempted by a highly experienced restoration technician trained in chemical handling. Before using this product, carefully read the MSDS, product precautions and application instructions. Be careful not to allow this product to come in contact with the body, clothing or safety equipment.  Safety goggles and gloves must be used while handling this acidic product.

APPLICATION

It is better to apply this product to a cool window in the shade than to a hot window in direct sunlight. High heat will cause the acid to become more concentrated due to evaporation. Product may burn hot glass. Use Glass ReSurfacer Final Polish to remove haze or burns.Apply product to windows using a clean window cleaning brush. Use caution so that product is not allowed to drip or run down the window onto adjacent building materials. Apply just enough product to keep the surface of the glass moist. Consistently agitate the surface of the glass with a lightly damp applicator brush. Allow product to remain on the glass until desired amount of mineral staining is removed. The product should remain in a liquid state on the glass for at least 5 minutes, but no more than 30 minutes.

To remove product from the glass, use a squeegee while holding the window cleaning brush under it to catch excess material. Use rags to soak up any excess product. Once the product is removed, use a water hose or window cleaning process to thoroughly rinse all surfaces that have been exposed. Carefully rinse tools when finished, and dispose of any used rags.

The glass will now be ready for the Glass ReSurfacer Final Polish process, which is necessary to produce a highly reflective finish on the glass.

Case Study: Heavily stained windows that require 4 man-hours to restore using Glass ReSurfacer Final Polish have been documented to take less than 1 man-hour when Glass ReSurfacer Stripper was applied first.

PRECAUTIONS

  • There are over 160 types of glass available today. Each type of glass has slightly different characteristics and temperaments. This product has been tested on most, but not all, types of glass.
  • This product should never be used on glass that has any type of exterior high performance coating (self cleaning glass or tinting) unless you wish to remove the coating.
  • Take special precautions when using any acidic product such as Glass ReSurfacer Stripper.
  • When using Glass ReSurfacer Stripper it is important not to allow the product to come into contact with any stone material such as precast. Stripper will clean the material changing its appearance in comparison to the rest of the building.

WARRANTIES

The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.

Additional information

Weight 36 lbs

Reviews

There are no reviews yet.

Be the first to review “Glass ReSurfacer Stripper Case”

Your email address will not be published. Required fields are marked *

Post comment