Description
Metal Protector MD Case (12 Quarts)
|
Metal Protector MD Installs an invisible, protective shield without altering the appearance of the metal. DESCRIPTIONThis product formulation contains high-performance silicone designed to install durable, long-lasting protection on a variety of metal surfaces, including anodized aluminum, which is commonly found on window mullions. This product shields metal surfaces from water and oxygen, and helps prevent these elements from aiding in the corrosion of the metal; thus preventing the need for frequent restoration. A barrier is created between contamination found in the environment and the metal surface, forcing stain-forming contaminants to settle on the polymeric coating. These contaminants are then easily cleaned during regular window cleaning maintenance services.
This coating will last up to five years depending on individual environmental conditions and the frequency of maintenance services performed on the substrate.
ADVANTAGES
INTENDED USEFor use on a variety of metal surfaces including, but not limited to, anodized aluminum. MD: 800 to 1250 sq. ft. per quart.
SURFACE PREPARATIONFor best adhesion and protection, first restore the surface with Metal ReSurfacer. If contaminants are not removed prior to use, the adhesion ability of Metal Protector may be compromised. If applying this product after restoring the surface with EnviRestore Metal Stain Remover, use a solvent wipe to prepare the surface. Protect unintended surfaces. Always test in a small, inconspicuous area prior to application. APPLICATIONFor invisible protection using Metal Protector MD: Apply product to metal surfaces with a sponge or rag. Spread Metal Protector in a circular, overlapping motion making sure to thoroughly work the product into every inch of the metal with multiple strokes. Once the area has been completely covered, use an absorbent rag or towel to remove excess residue and dry the surface. For superior, yet invisible protection, apply the product to the surface creating an evenly wet coating and allowing the product to dry. Do not disturb the surface for 24 hours. Any wet rags that are laden with product may be flammable. special precautions should be taken to protect these items from exposure to any ignition sources. MAINTENANCEIn most circumstances, protected metal surfaces can be cleaned using only deionized water. WARRANTIESThe information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. If this product is found to be defective, we will provide a sufficient amount to replace the defective product.
|
||||||||||||||||
Reviews
There are no reviews yet.