This product is specially formulated to safely and efficiently remove stains without the use of machinery from polished stone that are caused by soap scum, sealer and repellant overspray, caulking residue, calcium and lime buildup and more.
- Environmentally friendly
- Removes soap scum
- Removes mineral deposits
- Removes waterproofing overspray
- Fights grease and grime
- No harsh abrasives
- Low VOC
- Easy to use
Apply with either a clean, dry window cleaning rag or a white, synthetic, non-abrasive pad. Rub the surface in a circular motion until the stain is removed, wiping away any excess product.
If the surface of the stone is dark and white pigments from this product are noticeable in the pores of the stone, use a pressure washer or spray bottle to remove the excess material from the pores of the stone. Do not use shoe polish or any other dark filler as these materials easily break down and cause staining on building surfaces. Follow the same instructions for each application.
Situations including various stone types or different natured stains may require multiple products. Presto’s stone cleaning line includes:
- Stone Restore® HD For difficult to remove mineral stains caused by efflorescence, rusting, red clay, iron and more
- Stone Restore® CT A multi-purpose stone cleaner that removes a variety of stains from all types of stone materials
- Stone Restore® PS For stubborn surface contamination on all types of polished stone
- Stone Restore® CB2 For difficult to remove biological stains
Surface must be cleaned to remove any dirt or sand that may scratch the polished stone. It is extremely important that the application pad or rag used with this product is never contaminated with these or other types of harmful abrasives. Always test in a small, inconspicuous area prior to use to ensure no scratching or undesirable effects are caused.
If product is allowed to dry out and become dusty, appropriate respiratory protection must be used. This product may cause minor scratching when used in conjunction with a polisher or abrasive pad.
This product is suitable for use on horizontal or vertical polished stone surfaces.
250 to 400 feet per quart.
|Stone Restore PS Product Info Chart|
The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.