Description
This product is designed to remove stains from the surface of metal caused by mineral deposits, rust, salts, efflorescence, and high mineral content tap or well water. This solution also removes damage caused by soap scum, oils, acid rain, adhesive stains, water-repellant overspray and/or leaching, caulking or coating residue, exhaust fumes, everyday grime and buildup, and other stubborn stains from architectural surfaces without the use of machinery.
ADVANTAGES
- Environmentally safe
- User-friendly
- Pleasant fragrance
- Acid-free
- Removes stubborn stains
- Easily removes oily silane and siloxane waterproofing overspray
- No greasy residue
- Water-based
- Cost-effective
- Easy to use and clean up
- Less skill is required to effectively restore surfaces
- Removes years of build-up
- Long shelf life (3 years)
- Restores anodized aluminum
- Restores aluminum composite materials
- Restores and adds protection simultaneously
- A versatile product that can be used on multiple surfaces
- Fights grease and grime
INTENDED USE
This product is formulated for use on specialty architectural surfaces such as aluminum composite panels, anodized aluminum, glass, and other building exterior surfaces.
COVERAGE RATES
200 – 500 sq. ft. per quart depending on the level of staining
NECESSARY EQUIPMENT
- Gloves and goggles
- White, non-abrasive pad, towel or sponge
SURFACE PREPARATION
Clean the surface prior to use. Remove dirt or sand that may scratch the surface. It is extremely important that the application pad or towel used with this product is not contaminated with abrasives. Always test in a small, inconspicuous area in direct sunlight prior to use.
APPLICATION
Apply this product to previously cleaned surfaces with the EnviRestore MSR Foam Pad, microfiber towel, soft sponge, white non-abrasive pad, or an absorbent towel. Apply a small amount of product to the applicator. Lightly agitate the product in a circular motion until the stain is removed, wiping away any excess residue. Do not inhale any dry dust from this product.
In some instances, a second or third application may be required.
This product may also be used with a motorized polisher or random orbital sander as long as the applicator pad is nonabrasive. For best results restoring softer materials use the EnviRestore MSR Foam Pad and The Backer Pad
EnviRestore MSR Foam Polishing Pad in 6″ Size
If the stains are still not removable using this product, try using Presto’s Metal ReSurfacer with a motorized polisher.
This product installs temporary surface protection that is short-lived in comparison to most other protective treatments in Presto’s line. If a longer-lasting protective treatment is desired, use a solvent wipe to remove the temporary protective treatment in preparation for Metal Protector.
| EnviRestore MSR Product Info Chart | |
| Solvent | Water Based |
| Flammable | No |
| User Friendly | Yes |
| Economically Efficient | Yes |
| Environmentally Friendly | Yes |
| Color | Green |
| Smell | Unique |
The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.
Reviews
There are no reviews yet.